關於部落格
crusher machine
  • 71

    累積人氣

  • 0

    今日人氣

    0

    追蹤人氣

200 mesh Talc Raymond Mill for Sale

It can be feel that a lot of consumers are not familiar with talcum(talc) powder. Talc is a common developing material, and that is extensively used in the decoration. Currently, one of the most applied talcum powder fineness is about 200 mesh. What sort of gear is a lot more ideal for processing 200 mesh talcum powder? As a consequence of the hardness of talc, 200 mesh fineness is not really as well high, so we endorse that you just use the raymond mill for processing. Raymond mill processing talc no trouble, flour fineness concerning 30-425 mesh. When it comes to production, processing talc Raymond mill can reach relatively high yields. At the moment, when medium-sized processing gear talc manufacturing can attain about 10-15 tons, although production of large gear can reach about 20-25 tons, to meet the requires of most users. So as to let consumers to comprehend the processing capacity of our Raymond mill, we can provide customers free of charge testing with the machine, end users can deliver the material on the factory test machine, I see for the processing capability from the products and then decide whether or not to buy.

The way to Manage Raymond Mill Feeding Process

It really is pretty important to manage raymond mill feeding technique, and that is relevant to efficiency and particle dimension. Our company engineer summarizes the control and automated feeding tuning system. Raymond mill feed adopts electrimagnetic vibrating feeding approaches. Electric vibrator is a two-particle orientation forced vibration methods. By tank, connecting fork, armature elements. Whole electrical vibrator feeder should really be a cost-free state hanging about there should be a gap of swimming, without having touching the materials and feeder to avoid noise at work. Immediately after installation, the connection need to be applied to find the fork and loosen the screws seized when (inside the prime 3 from the vibrator component, beneath one), will loosen and tighten the lock nut.

Open the vibrator back cover, test the core plus the armature air gap is inside the variety of 1.8 ~ two.1mm, are parallel and clean and check out each of the screws loose phenomenon, especially with all the armature core compression screw and plate spring, almost everything is typical following the back cover. Powered no-load test, adjust potentiometer, slowly and slowly raise by a little, adjustable amplitude, observed adjustments from the amplitude and current amplitude at one.75-7%, the present in 0.6 ~ two.5A, steady observe above 1h latest amplitude The stability of each aspect with out loosening the screws. In all usual circumstances, open the gate for material transport silo observed amplitude once again (amplitude make it possible for open hopper drop 0.5mm, such as falling also shall electrical vibrating feeder trough guide inspection and adjustment on the elastic ballast technique ) as well as present is stable, the feeding volume meets the needs. Including amplitude and present ratings are in, in case the feeding quantity still to meet specifications, lifting the vibrator right into a downward inclination, so as to meet the demands for quantity, however the optimum inclination (angle in between the horizontal trough) not a lot more than twenty degrees.

相簿設定
標籤設定
相簿狀態