關於部落格
crusher machine
  • 71

    累積人氣

  • 0

    今日人氣

    0

    追蹤人氣

Information Raymond mill

Raymond also known as Raymond mill, which applies Mohs hardness of not better than 9.3, the planning of the variety of ore, coal planning of non-inflammable and humidity under 6%, like raw ore, gypsum mine , coal and other materials, powder processing. Through the visual appeal seem like a steel container upright, with inlet, outlet, central feed inlet. The reduced a part of the grinding mill has an internal motor driven rotary disc will really need to stick with the material crushing or grinding mill, as a result of inlet wind blowing the finished materials, within the upper mill includes a separator, the thickness in the powder can be separated, after which by way of the mill by way of wind machine out in the outlet to gather.

Raymond significant element in the manufacturing capability of the affected. Mini Raymond Mill affecting the production capability of lots of elements: the hardness of the material. More difficult components Raymond mill it a lot more hard, but also much more really serious put on and tear on gear. Raymond mill is slow, not surprisingly, Raymond mill capability is small. Humidity of supplies, products that have water in significant, the material is easy to adhere to your information of Raymond mill, but additionally easy to plug the following conveying system, resulting in the capability to cut down the Raymond mill. Raymond mill following the fineness of supplies, fineness demands, which necessitates Raymond mill out the finer materials, the smaller the Raymond mill capability. Composition of products, Raymond mill before the materials contained during the powder, the far more influence Raymond mill, because these fines uncomplicated adhesion of transport. For more fines material really should advance once sieve. Viscosity components. Ie viscosity with the material, the far more probably to adhere to. Raymond mill Raymond mill elements (hammer, jaw) with the bigger the far better put on resistance Raymond mill capability, if not dress in, will have an effect on the capacity of Raymond mill.

Use and maintenance of Raymond. Raymond mill prior to putting in the operating personnel will have to perform the required technical education to know the principles of overall performance of Raymond mill, Raymond mill are familiar with the principles. Raymond Mill during the use of the method, there really should be a fixed charge of personnel, the operator have to possess a specified degree of technological innovation. For the Raymond mill usual, really should develop tools "equipment maintenance secure operation of the system" can ensure the long-term secure operation on the mill, but have the important fix equipment and grease along with the corresponding equipment. Raymond mill following a time frame, needs to be carried out maintenance, although roller grinding ring blade overhaul replacement of sporting parts including processing, grinding roller device before and following the use of the connection bolts and nuts really should be thoroughly examined to find out if you can find loose phenomenon, no matter if to add a little grease. When Raymond mill roller gadget usage time above 500 hours or so to exchange the roller, the roller of each rolling bearing kit needs to be cleaned, broken components should be replaced, fuel pumps and hand tools offered grease gun. Shutdown, quit feeding, the host continues to rotate, the residual materials is milled to proceed, right after about a minute, flip off the master motor, end grinding operate, which then stops the fan motor plus the motor analyzer.

相簿設定
標籤設定
相簿狀態